• Dual-hook connection design: Can be used with dual-point phone lanyards, or single-point connection depending on the lanyard style.
  
• 210D High-strength nylon: Lightweight and flexible, adding minimal bulk when placed inside the phone case.
  
• Stainless steel D-ring: Provides an attachment point for lanyards, making it convenient for daily use and carrying your phone.
  
• Approx. 0.5–0.55 mm thin design: The tether tab sits between the phone and the case, with the attachment point extending through the charging port.
  
• No-drill installation for full-coverage phone cases: Allows compatible phone cases without built-in lanyard holes to be used with a lanyard.

Product Name: STRAP⁺ Dual-Hook Phone Tether Tab

Product Type: In-case dual-hook tether tab

Main Materials: 210D high-strength nylon, stainless steel D-rings

Product Thickness: Approx. 0.5–0.55 mm

Weight Capacity: Static load up to 3 kg

Compatible Phone Cases: Full-coverage cases that allow the connector to pass through the charging port and securely enclose the phone

Installation Method: Place the tab inside the phone case, extend the connector through the charging port, then insert the phone

Product Colors: Midnight Black, Cosmic Orange, Starlight White, Rock Grey

Package Contents: STRAP⁺ Dual-Hook Phone Tether Tab × 1

1. Place the tether tab flat inside the phone case, with the two connection ends facing the charging port; then insert the phone and ensure the edges of the case are fully snapped into place.
   
2. Attach the lanyard clip to the D-ring, and give it a gentle tug before use to ensure both the clip and the tether tab are securely connected.
   
3. After initial installation, please ensure the charging cable can be inserted properly. If the phone case is lifted by the tether tab or the charging port is obstructed, please stop using it and switch to a compatible phone case.
   
4. Regularly check the nylon tab, seams, and D-ring for wear, deformation, or looseness; stop using if any abnormalities are found.
   
5. Clean surface dirt with a slightly damp, soft cloth and allow it to dry thoroughly. Avoid soaking, machine washing, or using bleach or chemical solvents.
   
6. Do not swing the phone by the lanyard, hang heavy objects from it, or pull on the tether tab with sudden force.

UNIU products come with a one-year limited warranty, which covers functional defects or structural flaws not caused by human factors.

The warranty does not cover the following situations:

1. Scratches, wear and tear, fading, or cosmetic marks resulting from normal use.
   
2. Damage caused by human factors such as impact, drops, pulling, or squeezing.
   
3. Damage caused by contact with seawater, hot springs, chemical detergents, or improper cleaning.
   
4. Disassembly, modification, or use in a non-standard manner.
   
5. Purchases made through non-official UNIU channels where proof of purchase cannot be provided.

The 7-day appreciation period only applies to purchases made online through the UNIU official website. The product must be in its original packaging, with all accessories, and show no signs of significant use. The 7-day appreciation period does not apply to purchases made at physical stores.

Q1: Does the phone case itself need to have a lanyard hole?

No. The tether tab is placed inside the phone case, with the connector extending through the charging port; however, the phone case must still be able to fully enclose and securely hold the phone.

Q2: Can it be used with all phone cases?

Not necessarily. This product is mainly designed for full-coverage phone cases; it is not suitable if the charging port opening is too small, the case cannot fully snap shut, or the connector is being compressed by the case.

Q3: Can it be used with a single-hook lanyard?

The product page indicates compatibility with single-point wrist straps and dual-point phone lanyards. Please ensure the lanyard hardware can securely latch onto the D-ring before actual use.

Q4: Will it affect wired or wireless charging?

The slim design aims to accommodate daily charging; for wired charging, you still need to ensure there is enough space between the charging head and the phone case opening, while for wireless charging, you should test it with your specific phone case and charger combination.

Q5: Does the 3 kg rating mean I can hang 3 kg of weight?

No. The product page specifies a static load of 3 kg or less, which does not mean it can withstand swinging the phone, sudden tugging, or hanging other heavy objects.